Get Adobe Flash player

M-Series Marking Machines

Printer Friendly... Manual Drawings Quote Sample Marks

Machine Examples

The complete I-Mark bench-top dot-peen marking system is offered in two versions:

  1. Standard for marking flats,
  2. With a third axis for marking the OD of round parts.

M-Series dot-peen systems mark a wide variety of metal and plastic parts with a selection of fonts for alpha/numeric, serial numbers, date codes, logos, and 2D codes. This machine features the easy to use I-Mark software.

Options include: a selection of marking windows and an operator touch screen upgrade. These systems are good solutions for moderate production (250-750 parts per shift) marking requirements.

M-Series Marking Machine

M-Series Optional 3rd Axis Rotator

Optional 3rd Axis Rotator: To mark the OD of round parts. Chuck load up to 15 lbs (6.8 kg), jaw size of 3.14" (80mm) and maximum OD up to 6" (150mm). A longer table is used to accommodate the rotator.

Options: Machine base, part locating fixture, push button start, custom software.

Complete marking system:

  • Pneumatic Dot-Peen Marking Head in three window sizes
  • Bench-top stand with Standard aluminum T-slot table 12" x 14" (305 x 380mm) includes heavy duty column with manual vertical adjustment for parts up to 10 ¾" (275mm) tall.
  • Model 100 I-Mark Controller
  • Keyboard and monitor with optional touch-screen upgrade
  • Shut-off/Filter/Regulator
  • All cables required to set-up marking station



Bench Top M-Series How to Order

M-Series How To Order Chart



    • Electrical components require 110 VAC power, 6 ft (1.8m) electrical cord supplied
    • Air powered pin - 1/4 NPT fitting requires connection to air supply
    • Pressure/depth control through supplied regulator (30-75 PSI operating range)


  • Marking Window Selections
    • 3” x 3” (75 x 75mm)
    • 5” x 5” (125 x 125mm)
    • 8” x 8” (200 x 200mm)
  • Marking Pin Options
    • Standard pin - Marking speed of 3-4 (1/8”, 3mm) characters per second
    • Fixed dot placement for UID code – Marking speed of 1-2 (1/8”, 3mm) characters per second
  • Monitor and Keyboard with integrated mouse
  • 5 ft (1.5m) cable to connect marking head to controller
  • Marks materials (up to 45 RC)
  • Rotator parameters: Chuck load up to 15 lbs, and max OD up to 6” (150mm)

Illustration Of IM-M Series