I-Series Dot Peen Unit
Printer Friendly...
Manual
Drawings
Quote
Sample Marks
 |
Compact industrial integration dot-peen marking system with heavy duty frame and linear rail
guidance system to ensure precise operation. The marking speed is 3-5 characters per second.
It has a very small foot print with 3 sides available for mounting. These systems come with two
marking window options: medium and large size. The I-Mark controller uses the latest in drive
technology.
Complete marking unit for integration:
- Pneumatic Dot-Peen Marking Head in two
window sizes
- Model 200 I-Mark Controller
- I-Mark software for programming
- Power cable, Marking head cable,
Cross over cable, and LAN cable
The I-Mark-ID Marking Head:
Air and controller connection located on
back of marker.
- Solid aluminum frame with ½" plates on three
sides for easier mounting, all pre-drilled & tapped.
- High torque stepper motors and linear rails for precise
positioning.
- Pneumatic pin with carbide tip to mark materials up to 45 Rc
- Mountable in any orientation
|
The I-Mark Model 200 controller:
- Compact design for easy installation
into production equipment.
- Communication options including
remote programming over LAN,
and operational controls via I/O,
Modbus, Serial, Ethernet IP ect.
- Monitor upgrade and more
Options:
- Pedestal mount
- Upgrades: database and camera
integration
|

|

Utilities:
- Controller requires 110 VAC power, 6 ft (1.8m) electrical
cord supplied
- Air power required, 8mm push-in tube fitting requires
connection to air supply (30-75 PSI operating range)
|
Features:
- High torque stepper motors
with cog tooth drive belts
allow mounting of unit in
any orientation
- 2 marking windows;
o Medium = 1.59" x 2.35"
(40 x 60mm)
o Large = 3.18" x 7.87"
(80mm x 200 mm)
- Marking speed of 5 (1/8",
3mm) cps
- 10 ft (3m) or 25 ft (7.5m)
cable from head to
controller
- Carbide pin included –
Marks plastic, wood and
metals (up to 45 RC)
- Weight of marking head
only: 12.42 lbs (5.6 kg)
|
 |